https://www.phoenixcontact.com/in/products/1413117
Mini ground terminal block - MBK 3/E-Z-PE - 1413117
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Mini ground terminal block, Connection method: Screw connection, Cross section: 0.2 mm² - 4 mm²,
AWG: 24 - 12, Width: 5.2 mm, Color: green-yellow, Mounting type: NS 15
Product Features
If the mini ground terminal blocks are at the end of a terminal strip, an end bracket, e.g., E/MK, should be used
The green-yellow housing clearly indicates the protective conductor function of the terminal block
The mini ground terminal blocks are electrically connected to the DIN rail via their foot elements, which means that the DIN rail can be used as a
grounding busbar
These mini ground terminal blocks were specifically designed for 15 mm NS 15 DIN rails according to EN 60715
Key Commercial Data
Packing unit
50 pc
GTIN
Weight per Piece (excluding packing)
5.86 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Note
When aligning with a feed-through terminal block with the same shape,
an end cover must be interposed with insulation voltages of > 250 V
Number of levels
1
Number of connections
2
Nominal cross section
2.5 mm²
Color
green-yellow
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
02/02/2016 Page 1 / 8
https://www.phoenixcontact.com/in/products/1413117
Mini ground terminal block - MBK 3/E-Z-PE - 1413117
Technical data
General
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-2
Open side panel
No
Dimensions
Width
5.2 mm
Length
28 mm
Height NS 15
31.5 mm
Connection data
Note
Please observe the current carrying capacity of the DIN rails.
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-2
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Min. AWG conductor cross section, flexible
24
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, max.
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
Stripping length
8 mm
Internal cylindrical gage
A3
Screw thread
M3
Tightening torque, min
0.6 Nm
Tightening torque max
0.8 Nm
Standards and Regulations
02/02/2016 Page 2 / 8
https://www.phoenixcontact.com/in/products/1413117
Mini ground terminal block - MBK 3/E-Z-PE - 1413117
Technical data
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-2
Flammability rating according to UL 94
V0
Classifications
eCl@ss
eCl@ss 4.0
27141118
eCl@ss 4.1
27141118
eCl@ss 5.0
27141118
eCl@ss 5.1
27141118
eCl@ss 6.0
27141141
eCl@ss 7.0
27141141
eCl@ss 8.0
27141141
eCl@ss 9.0
27141141
ETIM
ETIM 2.0
EC000901
ETIM 3.0
EC000901
ETIM 4.0
EC000901
ETIM 5.0
EC000901
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / cUL Recognized / PRS / EAC / EAC / cULus Recognized
Ex Approvals
Approvals submitted
02/02/2016 Page 3 / 8
https://www.phoenixcontact.com/in/products/1413117
Mini ground terminal block - MBK 3/E-Z-PE - 1413117
Approvals
Approval details
CSA
mm²/AWG/kcmil
28-12
UL Recognized
mm²/AWG/kcmil
30-12
cUL Recognized
mm²/AWG/kcmil
30-12
PRS
EAC
EAC
cULus Recognized
Accessories
Accessories
DIN rail
DIN rail, unperforated - NS 15 UNPERF 2000MM - 1401695
DIN rail, material: Steel, unperforated, height 5.5 mm, width 15 mm, length: 2 m
02/02/2016 Page 4 / 8
https://www.phoenixcontact.com/in/products/1413117
Mini ground terminal block - MBK 3/E-Z-PE - 1413117
Accessories
DIN rail perforated - NS 15 PERF 2000MM - 1401682
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 5.5 mm, width 15 mm, length:
2000 mm
DIN rail perforated - NS 15 AL PERF 2000MM - 1401763
DIN rail, material: Aluminum, perforated, height 5.5 mm, width 15 mm, length: 2 m
DIN rail perforated - NS 15 WH PERF 2000MM - 1204096
DIN rail, material: steel, perforated, height 5.5 mm, width 15 mm, length: 2 m
Labeled terminal marker
Zack marker strip - ZB 5 CUS - 0824962
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap
into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017
Zack marker strip, Strip, white, labeled, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 500, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
02/02/2016 Page 5 / 8
https://www.phoenixcontact.com/in/products/1413117
Mini ground terminal block - MBK 3/E-Z-PE - 1413117
Accessories
Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10,
11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering
field: 5.15 x 10.5 mm
Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2,
etc. up to 100, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x
10.5 mm
Marker for terminal blocks - ZB 5,LGS:L1-N,PE - 1050415
Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, Mounting type: Snap
into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
Marker for terminal blocks - UC-TM 5 CUS - 0824581
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting
type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm
Marker for terminal blocks - UCT-TM 5 CUS - 0829595
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting
type: Snap into tall marker groove, Lettering field: 4.6 x 10.5 mm
Screwdriver tools
02/02/2016 Page 6 / 8
https://www.phoenixcontact.com/in/products/1413117
Mini ground terminal block - MBK 3/E-Z-PE - 1413117
Accessories
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100
mm, 2-component grip, with non-slip grip
Terminal marking
Marker card - SBS 5:UNBEDRUCKT - 1007219
Marker card, Card, white, unlabeled, can be labeled with: Plotter, Perforated, Mounting type: Snap into tall marker
groove, Snap into flat marker groove, for terminal block width: 5.2 mm, Lettering field: 6 x 5.1 mm
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove,
for terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm
Marker for terminal blocks - UC-TM 5 - 0818108
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED,
Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm
Marker for terminal blocks - UCT-TM 5 - 0828734
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm,
Lettering field: 4.6 x 10.5 mm
Drawings
02/02/2016 Page 7 / 8
https://www.phoenixcontact.com/in/products/1413117
Mini ground terminal block - MBK 3/E-Z-PE - 1413117
Circuit diagram
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
02/02/2016 Page 8 / 8
